Instructions for use:
– Park the vehicle so that the tire valve is not on the ground. If possible, remove the object that deflated the tire.
– In very cold weather, warm the product by holding it.
– Shake the product well before using it.
– Connect the end of the hose to the tire valve on the product by screwing it on.
– Hold the spray in a vertical position.
– Remove the black safety cap from the product. By fully pressing the button on the top of the product, release all of the chemical mixture from the spray into the tire. As you do this, you will notice that the tire is inflating.
– Immediately after removing the hose, get in the car and drive a short distance to rotate the tire several times to evenly distribute the product inside the tire.
– The puncture will seal in a short time. Drive at a reasonable speed and have your tire inflated to the original specified air pressure at the nearest auto service station.